A level set projection model of lipid vesicles in general flows

A new numerical method to model the dynamic behavior of lipid vesicles under general flows is presented. A gradient-augmented level set method is used to model the membrane motion. To enforce the volume- and surface-incompressibility constraints a four-step projection method is developed to integrate the full Navier–Stokes equations. This scheme is implemented on an adaptive non-graded Cartesian grid. Convergence results are presented, along with sample two-dimensional results of vesicles under various flow conditions.     

DODAB and DODAC bilayer-like aggregates in the micromolar surfactant concentration domain

In the millimolar concentration domain (typically 1 mM), dioctadecyldimethylammonium bromide and chloride (DODAX, X representing Br⁻ or Cl⁻ counterions) molecules assemble in water as large unilamellar vesicles. Differential-scanning calorimetry (DSC) is a suitable technique to obtain the melting temperature (T _m) characteristic of surfactant bilayers, while fluorescence spectroscopy detects formation of surfactant aggregates, like bilayers. These two techniques were combined to investigate the assembly of DODAX molecules at micromolar concentrations, from 10 to 100 μM. At 1 mM surfactant, T _m ≈ 45 °C and 49 °C, respectively, for DODAB and DODAC. DSC and fluorescence of Nile Red were used to show the formation of DODAX aggregates, at the surfactant concentration as low as 10 μM, whose T _m decreases monotonically with increasing DODAX concentration to attain the value for the ordinary vesicles. The data indicate that these aggregates are organized as bilayer-like structures.     

Salinity Controlled Vesicle Formation and Growth in Aqueous Mixture of Aerosol OT/Triton X‐100

Mixed vesicles can be formed spontaneously from aqueous mixture of the double‐tailed anionic surfactant sodium bis(2‐ethylhexyl) sulfosuccinate (AOT) and the nonionic surfactant octylphenoxypolyethoxyethanol (Triton X‐100) under the inducement of salt, the formation mechanism of which should be attributed to the compression of salt on the electric bilayers of the head groups. The stability and the polydispersity of the vesicles are superior to single‐component AOT vesicles, which can be proved by the TEM image and visual observation. The vesicle region was presented in a pseudo‐ternary diagram of AOT/TX‐100/brine. The size of the vesicle was measured using dynamic light scattering. It is found that the vesicle size increases with the salinity but decreases with the content of TX‐100 in the mixture at the same salinity. Especially, the vesicle size is independent of the surfactant concentration at fixed salinity.     

Fusion Dynamics of Aqueous Glutamic Acid/Aminodecane/Ibuprofen Vesicles

Vesicles have been prepared at a constant molar ratio of L-glutamic acid/1-aminodecane/ibuprofen/H₂O. The fusion dynamics of the vesicles have been directly observed and followed by using optical microscopy and freeze fracture replication-electron microscopy technologies. With time increasing up to 25 minutes, the vesicles slowly fuse to form large stable vesicles. A membrane phase transition temperature is detected at 97°C.     

Self-Assembly of Trisiloxane-Tailed Sugar Surfactant in Aqueous Solution

Abstract

A lactobionamide-based trisiloxane surfactant (Si3N2–LA) was prepared via a two-step method. Structure characterization of Si3N2–LA was performed by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR). Surface activity and aggregation behavior in aqueous solution of Si3N2–LA were investigated by surface tension measurements, dynamic light scattering (DLS) and negative-stained transmission electron microscopy (TEM). The results show that the surfactants can self-assemble into spherical vesicles with diameters in the range from 50 to 150 nm due to the introduction of trisiloxane tail.     

Reduction-responsive vesicles composed of dimethylaminopropyl octadecanamide and dithiodipropionic acid

Reduction-responsive vesicle was prepared by salt-bridging N-[3-(dimethylamino)propyl]-octadecanamide (DMAPODA, a cationic amphiphile) using 3,3′-dithiodipropionic acid (DTPA, a disulfide diacid compound). According to the transmission electron micrograph and the fluorescence quenching degree (53.2%), it could be said that vesicles were formed when the DMAPODA to DTPA molar ratio was 2:2. The DMAPODA/DTPA associate was considered to be a building block for vesicle formation because DTPA could electrostatically associate with DMAPODA and help the cationic amphiphile assemble into the vesicle. On a differential scanning calorimetric thermogram, the DMAPODA/DTPA vesicle showed two endothermic peaks at 50.6°C and 63.2°C. The peak found at the lower temperature was possibly due to the solid gel-to-liquid crystal phase transition of the vesicular membrane and the peak found at the higher temperature was considered to be due to the melting of DMAPODA, indicating that unassociated DMAPODA coexisted with DMAPODA/DTPA vesicles. The release of calcein enveloped in the vesicle was promoted by DL-dithiothreitol, possibly because DTPA can be broken by the reducing agent to form mercaptopropionic acids and the vesicle could be disintegrated and/or the vesicular membrane would become defective.     

磁性非对称双链长表面活性剂囊泡凝胶

合成了一系列含磁性反离子的非对称双疏水链长的阳离子表面活性剂,其中三氯一溴铁合十六烷基戊基二甲基铵(C_(16)C_5DMA~+[FeCl_3Br]-~)与偶氮羧酸钠盐(AzoNa_4)在酸性条件水溶液中形成磁性囊泡凝胶。运用cryo-透射电镜(TEM)、冷冻蚀刻TEM(FF-TEM)、流变仪、傅里叶变换红外光谱(FT-IR)和超导量子干涉(SQUID)等表征技术对囊泡凝胶进行了结构和性质研究,结果发现:凝胶含有曲率多变的融合性的双层囊泡,这些双分子层结构模构了自然界中各种物象的结构轮廓,展现了不可预测的多变曲率和良好柔性。聚集体双分子层膜内由长短不对称烷基链采取交错相扣的双分子层排列模式,这种构建模式结构稳定,短烷基链可游离出囊泡双分子层并伸向外部水相介质。两个相邻囊泡间的短链在疏水相互作用下形成非共价的囊泡"补丁",疏水的囊泡"补丁"克服相邻囊泡之间的斥力而融合。磁性反离子[FeCl_3Br]~-不仅赋予囊泡磁性,且在囊泡的形成过程中调控烷基链的组装。这种多形态融合性囊泡为揭示膜曲率的调节机制和构建人工细胞提供实验数据和理论参考。     

Topochemical polymerisation of assembled diacetylene macrocycle bearing dibenzylphosphine oxide in solid state

Novel diacetylene macrocycles 1 and 2 bearing dibenzylphosphine oxide were synthesised via Eglinton acetylenic intramolecular coupling. The X-ray analysis of crystals of macrocycles 1 and 2 demonstrated that the better-aligned tubular supramolecular structure was formed in macrocycle 1 than in macrocycle 2, which provided the possibility of diacetylene topochemical polymerisation in solid state of macrocycle 1. UV–vis, Raman spectroscopy and X-ray analysis indicated that the crystals of macrocycle 1 could undergo topochemical diacetylene polymerisation only on their surface by light irradiation; differential scanning calorimetry, solid-state ¹³C NMR spectroscopy and solubility test demonstrated that the crystals of macrocycle 1 could undergo diacetylene topochemical polymerisation inside solid by heat. As expected, based on the topological analysis of crystal structure, the crystals of macrocycle 2 could not undergo diacetylene topochemical polymerisation either by light irradiation or heat.     

Aggregate Conformation and Rheological Properties of Didodecyldimethylammonium Bromide in Aqueous Solution

Aggregation behavior of didodecyldimethylammonium bromide (DDAB) in aqueous solution was investigated using negative-staining and freeze-fracture transmission electron microscopy (TEM) methods. With the concentration increase, the vesicle size enlarged from the range of 100–200 nm to 500–3000 nm and the structure transform from unilamella to multilamella. Rheological and viscosity measurement results indicated that the system exhibited a gel-like material characteristic and shearing thinning in property, as shown that the apparent viscosity decreased gradually during the shear rate ascended from 1 × 10^?4–1 × 10⁴ s^?1. Furthermore, the relationship between aggregate conformation and solution rheological properties was discussed.     

Synthesis,characterization, and self‐assembly of comb‐dendronized amphiphilic block copolymers

Novel amphiphilic comb‐dendronized diblock copolymers composed of hydrophobic Percec‐type dendronized polystyrene block and hydrophilic comb‐like poly(ethylene oxide) grafted polymethacrylate P(PEOMA) block were designed and synthesized via two steps of atom transfer radical polymerization (ATRP). The comb‐like P(PEOMA) prepared by ATRP of macromonomers (PEOMA) with two different molecular weights (M_n = 300 and 475) were used to initiate the sequent ATRP of dendritic styrene macromonomer (DS). The molecular weights and compositions of the obtained block copolymers were determined by ¹H NMR analysis. The copolymers with relatively narrow polydispersities (1.27–1.38) were thus obtained. The bulk properties of comb‐dendronized block copolymers were studied by using differential scanning calorimetry, polarized optical microscopy and wide‐angle X‐ray diffraction (WAXD). Similar to dendronized homopolymers, the block copolymers exhibited hexagonal columnar liquid‐crystalline phase structure. By using such amphiphilic comb‐dendronized block copolymers as building blocks, the rich self‐assembly morphologies, such as twisted string, vesicle, and large compound micelle (LCM), were obtained in a mixture of CH₃OH and THF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4205–4217, 2008